Compatible with Racecapture MK3 Track?

[xShingox]

Hello, I apologize if this isnt the right way to contact you or ask questions.

I have a racecapture Mk3 and I'd like to install an oil pressure sensor on my 23' BRZ.

I was pointed this direction by "900BRZ's" youtube channel [https://www.youtube.com/watch?v=4Jk5WTWoqt4]

Question - is this compatible with race capture mk3? The MK3 Track is only able to capture CAN signals so I assume yes as long as I find a way to get the CANID properly? This is somewhat out of my realm of knowledge now.

[barm]

Hi, it should work fine since this injects the value directly into the CAN feed. You’d just need to add the CAN ID to your profile. Here’s the ID: 0x662 and the pressure value is the first byte.

canmim/main/board_config.h

Line 23 in 1c6063e

#define OIL_PRESSURE_CAN_ID 0x662

canmim/main/main.cpp

Line 455 in 1c6063e

frame.can_id = OIL_PRESSURE_CAN_ID;