Status: implemented locally on 2026-08-15; live iLO firmware acceptance remains open. These items were recorded after the first successful parallel HVM installation through the local stdio MCP bridge on two DL360 Gen10 systems.
Implementation: ilo_console_set_one_time_boot reuses the authenticated web
session owned by console_handle, accepts only device="cd", patches only the
two Redfish BootOverride fields, and verifies the result with a fresh GET. It
does not send a reset. Unsupported firmware and POST-busy responses are reduced
to safe errors without returning the remote response body.
Add ilo_console_set_one_time_boot(operation_id, console_handle, device, confirm).
- Initially support only
device="cd"for the virtual CD/DVD device. - Reuse the authenticated iLO/KVM session represented by
console_handle; do not require a separate Raw-Redfish login. - Set BootOverride only. Never imply or send a reset.
- Require
operation_idandconfirm: true; deduplicate retries through the existing per-console operation mechanism. - Return a structured before/current target, enabled and UEFI/legacy state, plus a verified GET result after the change.
- Report unsupported firmware and POST-busy states safely, without credentials, session keys, console handles or filesystem paths.
Live motivation: F11 required a BIOS administrator password. One host required
a one-off Raw-Redfish Cd/Once override, while the other accepted the same
credentials through KVM but rejected them through Raw Redfish.
Implementation: ilo_console_observe waits on state.frame_revision, caps the
wait at 30 seconds, observes cancellation, and returns the unchanged state on
timeout. The decoder advances the frame revision only for the initial usable
frame or a real framebuffer change, so power/POST events, identical video
blocks, and an initial revision of zero do not create a polling loop.
Complete or verify a compatible waiting form of
ilo_console_observe(console_handle, after_revision, wait_ms).
- Wait for a newer framebuffer revision instead of forcing client-side polling.
- On timeout, return the unchanged structured state.
- An initial revision of zero or a black initial frame must not cause rapid polling.
- Cap waits at about 30 seconds and observe context cancellation.
Implementation: virtual-media status now distinguishes mounted media, transport liveness, and firmware device readiness. It also reports ISO payload bytes read locally and delivered to iLO; only the safe ISO filename is exposed.
Extend the virtual-media status response with:
- transport-alive state;
- device-ready state;
- where available, read/delivered byte counters; and
- a clear distinction between an ISO transport being mounted and firmware recognizing a bootable virtual CD device.
Continue returning only safe filenames, never full ISO paths.
Implementation: ilo_console_management_status reads PowerState and the
current BootOverride target, enabled state, and UEFI/legacy mode through the
same authenticated session as the console.
Add a small read-only management-status interface on the same authenticated console session.
- Read
PowerStateandBootOverride. - Later, consider integrating already-confirmed power actions through that interface.
- Avoid making agents manage parallel proprietary web sessions, Redfish Basic credentials and KVM sessions for the same iLO target.
- Exactly one virtual-media session per
console_handle. busy_moderemainsfail; no implicit share or seize behavior.- Console close and TTL reaping unmount and close virtual media.
- Keep local stdio MCP registration.
- Require
operation_idandconfirmfor state-changing tools. - Never log or return credentials, session keys, console handles or full ISO paths.
The first live acceptance run successfully exercised ten ilo_console_* tools:
open, observe, mount, virtual-media status, input, power, unmount and close.
The remaining work is live acceptance of the new boot-override, waiting-observe,
management-status, and virtual-media-health behavior across the supported iLO
firmware generations.