Skip to content

fix: use dynamic base URL for sendmail and sendsms endpoints #105

fix: use dynamic base URL for sendmail and sendsms endpoints

fix: use dynamic base URL for sendmail and sendsms endpoints #105

Triggered via push May 25, 2026 11:21
Status Success
Total duration 10m 57s
Artifacts 47

dockerbuild.yaml

on: push
list_apps
5s
list_apps
Matrix: main
Fit to window
Zoom out
Zoom in

Annotations

4 errors and 695 warnings
main (exchange-powershell, 1.0.0)
buildx failed with: ERROR: failed to build: failed to solve: process "/bin/sh -c apk add --no-cache ca-certificates less ncurses-terminfo-base krb5-libs libgcc libintl libssl1.1 libstdc++ tzdata userspace-rcu zlib icu-libs curl" did not complete successfully: exit code: 1
main (exchange-powershell, 1.1.0)
buildx failed with: ERROR: failed to build: failed to solve: process "/bin/sh -c apk add --no-cache ca-certificates less ncurses-terminfo-base krb5-libs libgcc libintl libssl1.1 libstdc++ tzdata userspace-rcu zlib icu-libs curl" did not complete successfully: exit code: 1
main (outlook-exchange, 1.0.0)
buildx failed with: ERROR: failed to build: failed to solve: failed to compute cache key: failed to calculate checksum of ref orud05jma4jhjng7p0vpnu4a2::rejrzkdvgzi73c448ydam4lnb: "/usr/lib/libgpg-error.so.0": not found
main (snort3, 1.0.0)
buildx failed with: ERROR: failed to build: failed to solve: process "/bin/sh -c echo \"Build libsafec\" && tar -xzvf libsafec-${SAFEC_VER}.tar && cd libsafec-${SAFEC_VER}.0-g6d921f && ./configure && make -j 4 && make install && echo \"Build gperftools\" && cd ${SRC_HOME} && tar -xvf gperftools-$GPERF_VER.tar && cd ${SRC_HOME}/gperftools-$GPERF_VER && ./configure && make -j 4 && make install && echo \"Build libdaq\" && cd ${SRC_HOME} && tar xvf libdaq-${DAQ_VER}.tar && cd ${SRC_HOME}/libdaq-${DAQ_VER} && ./configure && make -j 4 && make install && echo \"Build Snort3\" && cd ${SRC_HOME} && tar xvf snort3-${SNORT_VER}.tar && cd ${SRC_HOME}/snort3-${SNORT_VER} && ./configure_cmake.sh --prefix=/usr/local --enable-tcmalloc && cd build && make -j 4 && make install && cd / && rm -rf ${SRC_HOME} && apk del build-base cmake" did not complete successfully: exit code: 2
list_apps
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v2. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
list_apps
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (google-chat, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals: google-chat/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
The 'as' keyword should match the case of the 'from' keyword: google-chat/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
The 'as' keyword should match the case of the 'from' keyword: google-chat/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
main (google-chat, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (google-chat, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (google-chat, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (google-chat, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (google-chat, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (google-chat, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (google-chat, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (google-chat, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (google-chat, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (google-chat, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (google-chat, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (gitguardian, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals: gitguardian/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
The 'as' keyword should match the case of the 'from' keyword: gitguardian/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
The 'as' keyword should match the case of the 'from' keyword: gitguardian/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
main (gitguardian, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (gitguardian, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (gitguardian, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (gitguardian, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (gitguardian, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (gitguardian, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (gitguardian, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (gitguardian, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (gitguardian, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (gitguardian, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (gitguardian, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (mysql, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals: mysql/1.0.0/Dockerfile#L27
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
The 'as' keyword should match the case of the 'from' keyword: mysql/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
The 'as' keyword should match the case of the 'from' keyword: mysql/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
main (mysql, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (mysql, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (mysql, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (mysql, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (mysql, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (mysql, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (mysql, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (mysql, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (mysql, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (mysql, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (mysql, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (gpg-tools, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals: gpg-tools/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
The 'as' keyword should match the case of the 'from' keyword: gpg-tools/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
The 'as' keyword should match the case of the 'from' keyword: gpg-tools/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
main (gpg-tools, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (gpg-tools, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (gpg-tools, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (gpg-tools, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (gpg-tools, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (gpg-tools, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (gpg-tools, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (gpg-tools, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (gpg-tools, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (gpg-tools, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (gpg-tools, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (archive-today, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals: archive-today/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
The 'as' keyword should match the case of the 'from' keyword: archive-today/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
The 'as' keyword should match the case of the 'from' keyword: archive-today/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
main (archive-today, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (archive-today, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (archive-today, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (archive-today, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (archive-today, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (archive-today, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (archive-today, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (archive-today, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (archive-today, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (archive-today, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (archive-today, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (postgress, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals: postgress/1.0.0/Dockerfile#L27
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
The 'as' keyword should match the case of the 'from' keyword: postgress/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
The 'as' keyword should match the case of the 'from' keyword: postgress/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
main (postgress, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (postgress, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (postgress, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (postgress, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (postgress, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (postgress, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (postgress, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (postgress, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (postgress, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (postgress, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (postgress, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (shuffle-subflow, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals: shuffle-subflow/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
The 'as' keyword should match the case of the 'from' keyword: shuffle-subflow/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
The 'as' keyword should match the case of the 'from' keyword: shuffle-subflow/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
main (shuffle-subflow, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (shuffle-subflow, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (shuffle-subflow, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (shuffle-subflow, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (shuffle-subflow, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (shuffle-subflow, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (shuffle-subflow, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (shuffle-subflow, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (shuffle-subflow, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (shuffle-subflow, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (shuffle-subflow, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (breachsense, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals: breachsense/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
The 'as' keyword should match the case of the 'from' keyword: breachsense/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
The 'as' keyword should match the case of the 'from' keyword: breachsense/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
main (breachsense, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (breachsense, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (breachsense, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (breachsense, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (breachsense, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (breachsense, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (breachsense, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (breachsense, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (breachsense, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (breachsense, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (breachsense, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (netcraft, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals: netcraft/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
The 'as' keyword should match the case of the 'from' keyword: netcraft/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
The 'as' keyword should match the case of the 'from' keyword: netcraft/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
main (netcraft, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (netcraft, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (netcraft, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (netcraft, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (netcraft, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (netcraft, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (netcraft, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (netcraft, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (netcraft, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (netcraft, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (netcraft, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (siemonster, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
The 'as' keyword should match the case of the 'from' keyword: siemonster/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals: siemonster/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
The 'as' keyword should match the case of the 'from' keyword: siemonster/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
main (siemonster, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (siemonster, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (siemonster, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (siemonster, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (siemonster, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (siemonster, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (siemonster, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (siemonster, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (siemonster, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (siemonster, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (siemonster, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (shuffle-subflow, 1.1.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals: shuffle-subflow/1.1.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
The 'as' keyword should match the case of the 'from' keyword: shuffle-subflow/1.1.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
The 'as' keyword should match the case of the 'from' keyword: shuffle-subflow/1.1.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
main (shuffle-subflow, 1.1.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (shuffle-subflow, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (shuffle-subflow, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (shuffle-subflow, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (shuffle-subflow, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (shuffle-subflow, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (shuffle-subflow, 1.1.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (shuffle-subflow, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (shuffle-subflow, 1.1.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (shuffle-subflow, 1.1.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (shuffle-subflow, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (email, 1.3.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
The 'as' keyword should match the case of the 'from' keyword: email/1.3.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals: email/1.3.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
The 'as' keyword should match the case of the 'from' keyword: email/1.3.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
main (email, 1.3.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (email, 1.3.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (email, 1.3.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (email, 1.3.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (email, 1.3.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (email, 1.3.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (email, 1.3.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (email, 1.3.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (email, 1.3.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (email, 1.3.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (email, 1.3.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (active-directory, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals: active-directory/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
The 'as' keyword should match the case of the 'from' keyword: active-directory/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
The 'as' keyword should match the case of the 'from' keyword: active-directory/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
main (active-directory, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (active-directory, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (active-directory, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (active-directory, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (active-directory, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (active-directory, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (active-directory, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (active-directory, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (active-directory, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (active-directory, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (active-directory, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (exchange-powershell, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
main (exchange-powershell, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (exchange-powershell, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (exchange-powershell, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (exchange-powershell, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (exchange-powershell, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (exchange-powershell, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (exchange-powershell, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (exchange-powershell, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (exchange-powershell, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (exchange-powershell, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (exchange-powershell, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-waf, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals: aws-waf/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
The 'as' keyword should match the case of the 'from' keyword: aws-waf/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
The 'as' keyword should match the case of the 'from' keyword: aws-waf/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
main (aws-waf, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-waf, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-waf, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-waf, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-waf, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-waf, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-waf, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-waf, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-waf, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-waf, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-waf, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-cloudwatch, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals: aws-cloudwatch/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
The 'as' keyword should match the case of the 'from' keyword: aws-cloudwatch/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
The 'as' keyword should match the case of the 'from' keyword: aws-cloudwatch/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
main (aws-cloudwatch, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-cloudwatch, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-cloudwatch, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-cloudwatch, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-cloudwatch, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-cloudwatch, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-cloudwatch, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-cloudwatch, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-cloudwatch, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-cloudwatch, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-cloudwatch, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (exchange-powershell, 1.1.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
main (exchange-powershell, 1.1.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (exchange-powershell, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (exchange-powershell, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (exchange-powershell, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (exchange-powershell, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (exchange-powershell, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (exchange-powershell, 1.1.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (exchange-powershell, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (exchange-powershell, 1.1.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (exchange-powershell, 1.1.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (exchange-powershell, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-ec2, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals: aws-ec2/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
The 'as' keyword should match the case of the 'from' keyword: aws-ec2/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
The 'as' keyword should match the case of the 'from' keyword: aws-ec2/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
main (aws-ec2, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-ec2, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-ec2, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-ec2, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-ec2, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-ec2, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-ec2, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-ec2, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-ec2, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-ec2, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-ec2, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (velociraptor, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals: velociraptor/1.0.0/Dockerfile#L20
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
The 'as' keyword should match the case of the 'from' keyword: velociraptor/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
The 'as' keyword should match the case of the 'from' keyword: velociraptor/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
main (velociraptor, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (velociraptor, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (velociraptor, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (velociraptor, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (velociraptor, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (velociraptor, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (velociraptor, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (velociraptor, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (velociraptor, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (velociraptor, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (velociraptor, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (archive-org, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals: archive-org/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
The 'as' keyword should match the case of the 'from' keyword: archive-org/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
The 'as' keyword should match the case of the 'from' keyword: archive-org/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
main (archive-org, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (archive-org, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (archive-org, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (archive-org, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (archive-org, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (archive-org, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (archive-org, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (archive-org, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (archive-org, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (archive-org, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (archive-org, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (vader, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
The 'as' keyword should match the case of the 'from' keyword: vader/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals: vader/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
The 'as' keyword should match the case of the 'from' keyword: vader/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
main (vader, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (vader, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (vader, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (vader, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (vader, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (vader, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (vader, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (vader, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (vader, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (vader, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (vader, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-lambda, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals: aws-lambda/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
The 'as' keyword should match the case of the 'from' keyword: aws-lambda/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
The 'as' keyword should match the case of the 'from' keyword: aws-lambda/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
main (aws-lambda, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-lambda, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-lambda, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-lambda, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-lambda, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-lambda, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-lambda, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-lambda, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-lambda, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-lambda, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-lambda, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (microsoft-excel, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
The 'as' keyword should match the case of the 'from' keyword: microsoft-excel/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals: microsoft-excel/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
The 'as' keyword should match the case of the 'from' keyword: microsoft-excel/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
main (microsoft-excel, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (microsoft-excel, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (microsoft-excel, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (microsoft-excel, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (microsoft-excel, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (microsoft-excel, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (microsoft-excel, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (microsoft-excel, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (microsoft-excel, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (microsoft-excel, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (microsoft-excel, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (rss, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals: rss/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
The 'as' keyword should match the case of the 'from' keyword: rss/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
The 'as' keyword should match the case of the 'from' keyword: rss/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
main (rss, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (rss, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (rss, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (rss, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (rss, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (rss, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (rss, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (rss, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (rss, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (rss, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (rss, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (sooty, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals: sooty/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
The 'as' keyword should match the case of the 'from' keyword: sooty/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
The 'as' keyword should match the case of the 'from' keyword: sooty/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
main (sooty, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (sooty, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (sooty, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (sooty, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (sooty, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (sooty, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (sooty, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (sooty, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (sooty, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (sooty, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (sooty, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (outlook-exchange, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
main (outlook-exchange, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (outlook-exchange, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (outlook-exchange, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (outlook-exchange, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (outlook-exchange, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (outlook-exchange, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (outlook-exchange, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (outlook-exchange, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (outlook-exchange, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (outlook-exchange, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (outlook-exchange, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (secureworks, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals: secureworks/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
The 'as' keyword should match the case of the 'from' keyword: secureworks/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
The 'as' keyword should match the case of the 'from' keyword: secureworks/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
main (secureworks, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (secureworks, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (secureworks, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (secureworks, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (secureworks, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (secureworks, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (secureworks, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (secureworks, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (secureworks, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (secureworks, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (secureworks, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (snort3, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
main (snort3, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (snort3, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (snort3, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (snort3, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (snort3, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (snort3, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (snort3, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (snort3, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (snort3, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (snort3, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (snort3, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (http, 1.4.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals: http/1.4.0/Dockerfile#L27
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
The 'as' keyword should match the case of the 'from' keyword: http/1.4.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
The 'as' keyword should match the case of the 'from' keyword: http/1.4.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
main (http, 1.4.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (http, 1.4.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (http, 1.4.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (http, 1.4.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (http, 1.4.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (http, 1.4.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (http, 1.4.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (http, 1.4.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (http, 1.4.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (http, 1.4.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (http, 1.4.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-guardduty, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals: aws-guardduty/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
The 'as' keyword should match the case of the 'from' keyword: aws-guardduty/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
The 'as' keyword should match the case of the 'from' keyword: aws-guardduty/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
main (aws-guardduty, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-guardduty, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-guardduty, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-guardduty, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-guardduty, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-guardduty, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-guardduty, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-guardduty, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-guardduty, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-guardduty, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-guardduty, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (gpg-tools, 1.1.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals: gpg-tools/1.1.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
The 'as' keyword should match the case of the 'from' keyword: gpg-tools/1.1.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
The 'as' keyword should match the case of the 'from' keyword: gpg-tools/1.1.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
main (gpg-tools, 1.1.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (gpg-tools, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (gpg-tools, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (gpg-tools, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (gpg-tools, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (gpg-tools, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (gpg-tools, 1.1.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (gpg-tools, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (gpg-tools, 1.1.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (gpg-tools, 1.1.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (gpg-tools, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (redis, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
The 'as' keyword should match the case of the 'from' keyword: redis/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
The 'as' keyword should match the case of the 'from' keyword: redis/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals: redis/1.0.0/Dockerfile#L27
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
main (redis, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (redis, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (redis, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (redis, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (redis, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (redis, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (redis, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (redis, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (redis, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (redis, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (redis, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (cortex, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals: cortex/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
The 'as' keyword should match the case of the 'from' keyword: cortex/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
The 'as' keyword should match the case of the 'from' keyword: cortex/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
main (cortex, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (cortex, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (cortex, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (cortex, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (cortex, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (cortex, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (cortex, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (cortex, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (cortex, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (cortex, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (cortex, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (twilio, 1.9.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals: twilio/1.9.0/Dockerfile#L27
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
The 'as' keyword should match the case of the 'from' keyword: twilio/1.9.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
The 'as' keyword should match the case of the 'from' keyword: twilio/1.9.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
main (twilio, 1.9.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (twilio, 1.9.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (twilio, 1.9.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (twilio, 1.9.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (twilio, 1.9.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (twilio, 1.9.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (twilio, 1.9.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (twilio, 1.9.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (twilio, 1.9.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (twilio, 1.9.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (twilio, 1.9.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (checkpoint, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals: checkpoint/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
The 'as' keyword should match the case of the 'from' keyword: checkpoint/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
The 'as' keyword should match the case of the 'from' keyword: checkpoint/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
main (checkpoint, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (checkpoint, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (checkpoint, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (checkpoint, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (checkpoint, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (checkpoint, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (checkpoint, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (checkpoint, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (checkpoint, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (checkpoint, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (checkpoint, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-s3, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals: aws-s3/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
The 'as' keyword should match the case of the 'from' keyword: aws-s3/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
The 'as' keyword should match the case of the 'from' keyword: aws-s3/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
main (aws-s3, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-s3, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-s3, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-s3, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-s3, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-s3, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-s3, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-s3, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-s3, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-s3, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-s3, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (sigma, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals: sigma/1.0.0/Dockerfile#L29
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
The 'as' keyword should match the case of the 'from' keyword: sigma/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
The 'as' keyword should match the case of the 'from' keyword: sigma/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
main (sigma, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (sigma, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (sigma, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (sigma, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (sigma, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (sigma, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (sigma, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (sigma, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (sigma, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (sigma, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (sigma, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (databasemanager, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals: databasemanager/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
The 'as' keyword should match the case of the 'from' keyword: databasemanager/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
The 'as' keyword should match the case of the 'from' keyword: databasemanager/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
main (databasemanager, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (databasemanager, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (databasemanager, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (databasemanager, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (databasemanager, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (databasemanager, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (databasemanager, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (databasemanager, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (databasemanager, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (databasemanager, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (databasemanager, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (harfanglab-edr, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
The 'as' keyword should match the case of the 'from' keyword: harfanglab-edr/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals: harfanglab-edr/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
The 'as' keyword should match the case of the 'from' keyword: harfanglab-edr/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
main (harfanglab-edr, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (harfanglab-edr, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (harfanglab-edr, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (harfanglab-edr, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (harfanglab-edr, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (harfanglab-edr, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (harfanglab-edr, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (harfanglab-edr, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (harfanglab-edr, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (harfanglab-edr, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (harfanglab-edr, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-dynamodb, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals: aws-dynamodb/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
The 'as' keyword should match the case of the 'from' keyword: aws-dynamodb/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
The 'as' keyword should match the case of the 'from' keyword: aws-dynamodb/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
main (aws-dynamodb, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-dynamodb, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-dynamodb, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-dynamodb, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-dynamodb, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-dynamodb, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-dynamodb, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-dynamodb, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-dynamodb, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-dynamodb, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-dynamodb, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-iam, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals: aws-iam/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
The 'as' keyword should match the case of the 'from' keyword: aws-iam/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
The 'as' keyword should match the case of the 'from' keyword: aws-iam/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
main (aws-iam, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-iam, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-iam, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-iam, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-iam, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-iam, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-iam, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-iam, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-iam, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-iam, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-iam, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (shuffle-ai, 1.1.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
Legacy key/value format with whitespace separator should not be used: shuffle-ai/1.1.0/Dockerfile#L23
LegacyKeyValueFormat: "ENV key=value" should be used instead of legacy "ENV key value" format More info: https://docs.docker.com/go/dockerfile/rule/legacy-key-value-format/
Legacy key/value format with whitespace separator should not be used: shuffle-ai/1.1.0/Dockerfile#L24
LegacyKeyValueFormat: "ENV key=value" should be used instead of legacy "ENV key value" format More info: https://docs.docker.com/go/dockerfile/rule/legacy-key-value-format/
main (shuffle-ai, 1.1.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (shuffle-ai, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (shuffle-ai, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (shuffle-ai, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (shuffle-ai, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (shuffle-ai, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (shuffle-ai, 1.1.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (shuffle-ai, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (shuffle-ai, 1.1.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (shuffle-ai, 1.1.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (shuffle-ai, 1.1.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-securityhub, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
The 'as' keyword should match the case of the 'from' keyword: aws-securityhub/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
The 'as' keyword should match the case of the 'from' keyword: aws-securityhub/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals: aws-securityhub/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
main (aws-securityhub, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-securityhub, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-securityhub, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-securityhub, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-securityhub, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-securityhub, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-securityhub, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-securityhub, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-securityhub, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-securityhub, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-securityhub, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-ses, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals: aws-ses/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
The 'as' keyword should match the case of the 'from' keyword: aws-ses/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
The 'as' keyword should match the case of the 'from' keyword: aws-ses/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
main (aws-ses, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-ses, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-ses, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-ses, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-ses, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-ses, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-ses, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-ses, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-ses, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-ses, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (aws-ses, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (gws, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals: gws/1.0.0/Dockerfile#L26
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
The 'as' keyword should match the case of the 'from' keyword: gws/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
The 'as' keyword should match the case of the 'from' keyword: gws/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
main (gws, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (gws, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (gws, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (gws, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (gws, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (gws, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (gws, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (gws, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (gws, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (gws, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (gws, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (shuffle-tools, 1.2.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
The 'as' keyword should match the case of the 'from' keyword: shuffle-tools/1.2.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
The 'as' keyword should match the case of the 'from' keyword: shuffle-tools/1.2.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
main (shuffle-tools, 1.2.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (shuffle-tools, 1.2.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (shuffle-tools, 1.2.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (shuffle-tools, 1.2.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (shuffle-tools, 1.2.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (shuffle-tools, 1.2.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (shuffle-tools, 1.2.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (shuffle-tools, 1.2.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (shuffle-tools, 1.2.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (shuffle-tools, 1.2.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (shuffle-tools, 1.2.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (yara, 1.0.0)
Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: actions/checkout@v4, docker/build-push-action@v6, docker/login-action@v3, docker/setup-buildx-action@v1, docker/setup-qemu-action@v1. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Node.js 20 will be removed from the runner on September 16th, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/
JSON arguments recommended for ENTRYPOINT/CMD to prevent unintended behavior related to OS signals: yara/1.0.0/Dockerfile#L60
JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavior related to OS signals More info: https://docs.docker.com/go/dockerfile/rule/json-args-recommended/
Legacy key/value format with whitespace separator should not be used: yara/1.0.0/Dockerfile#L24
LegacyKeyValueFormat: "ENV key=value" should be used instead of legacy "ENV key value" format More info: https://docs.docker.com/go/dockerfile/rule/legacy-key-value-format/
Legacy key/value format with whitespace separator should not be used: yara/1.0.0/Dockerfile#L23
LegacyKeyValueFormat: "ENV key=value" should be used instead of legacy "ENV key value" format More info: https://docs.docker.com/go/dockerfile/rule/legacy-key-value-format/
The 'as' keyword should match the case of the 'from' keyword: yara/1.0.0/Dockerfile#L5
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
The 'as' keyword should match the case of the 'from' keyword: yara/1.0.0/Dockerfile#L2
FromAsCasing: 'as' and 'FROM' keywords' casing do not match More info: https://docs.docker.com/go/dockerfile/rule/from-as-casing/
main (yara, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (yara, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (yara, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (yara, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (yara, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (yara, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (yara, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (yara, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (yara, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (yara, 1.0.0)
The `save-state` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
main (yara, 1.0.0)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/

Artifacts

Produced during runtime
Name Size Digest
Shuffle~python-apps~035QLV.dockerbuild
39.9 KB
sha256:7b2d619ff4335c56f46d74c7a307a8344533feda0b6d4316bd29dec15515ed1d
Shuffle~python-apps~326NZ8.dockerbuild
81.1 KB
sha256:37facbdd5116d6701798fd8a96a632fceac372a1844ef3b850bf235a41780b6c
Shuffle~python-apps~3Z5WH3.dockerbuild
111 KB
sha256:568fde0bd3d340e247fe8630580201160fc4e3ccef116df71f41a405532d20f7
Shuffle~python-apps~4BQKII.dockerbuild
111 KB
sha256:6e2d792d586b2243f809d2fc31f845f73971a0e47cc2f365acbef5e5efa3ef2d
Shuffle~python-apps~5UYYG7.dockerbuild
104 KB
sha256:b35de651059834aaf9bbbbc46a6fe2e40b63f9c97c8f8f945af855839a683bb4
Shuffle~python-apps~67CQES.dockerbuild
36.2 KB
sha256:a6eee20cd73fc566449aef1427c0aa3aa69700328b57b1075c204b531928e3a7
Shuffle~python-apps~6H14W3.dockerbuild
105 KB
sha256:05bca0914c3550e7bc28dc1b7476efa56c7db498c0822091dfe1e76877669230
Shuffle~python-apps~6M0PLN.dockerbuild
110 KB
sha256:774069b7a3fca7db1b7aec02d3aa8fcb126e376240d1f8ab085d262a2590ba99
Shuffle~python-apps~A84WXQ.dockerbuild
109 KB
sha256:9baf8109519252ab53d104f2fce399fe81d13d5e26bdf91601c6f0a48339474f
Shuffle~python-apps~AXYXL1.dockerbuild
35.1 KB
sha256:a6950332a46b7177c144bf2a9081555285bb0e355825a331aec53827e6bc5301
Shuffle~python-apps~CETM16.dockerbuild
109 KB
sha256:811e324858fd01a3bf0cafc983a34873741f6668a2a03a0f2a840d696c0a5fee
Shuffle~python-apps~DMHDLC.dockerbuild
109 KB
sha256:de5ddd86e8f97bd13146784fc92be870c941216cc0a0d4f9691f3e004e691055
Shuffle~python-apps~EF7RHI.dockerbuild
108 KB
sha256:ff19aef9bc88b2091ba137626e47e61f774ca8e800498ba578a82a9b0c0cb768
Shuffle~python-apps~FHW98F.dockerbuild
108 KB
sha256:23a4c5f3e691c1c57f733c957264370eed068bf8e733063ecce7d17c95a5d9d3
Shuffle~python-apps~GOELCH.dockerbuild
108 KB
sha256:68bff385af11b462f2f02098303bb75785db2dfc06501c24cb85c6c52c9f5c7e
Shuffle~python-apps~GUAUP8.dockerbuild
87.1 KB
sha256:08fb9ff2f5cc2f2c5734ea83527b43b16ce167b39ecca73702132f54245a2c49
Shuffle~python-apps~H0RUHO.dockerbuild
109 KB
sha256:f65bb1003b9f1985a98c871f1cd377f53c103ab0343c9fa95ff844b809b7a803
Shuffle~python-apps~I70PVB.dockerbuild
100 KB
sha256:d0e10766f6d1c12d1e95d0a27368aa1cd9d5d5c002d4578976fc1661220f38df
Shuffle~python-apps~IQ5GBE.dockerbuild
113 KB
sha256:ff8652c119598691e8b55e28e775c70b88c85162c12a23f2f4b28c908a1e9ef0
Shuffle~python-apps~IXOVB3.dockerbuild
107 KB
sha256:39c82c034794ea24ddb114f22f2175ecf31949b8322cab652bba2932d2ff4dd1
Shuffle~python-apps~LZBGVJ.dockerbuild
173 KB
sha256:ab2dbd2fb3572d4e041ea6d8dc19c83e0da3ba9d4d39b315f0bb62e431e8df63
Shuffle~python-apps~M1C240.dockerbuild
106 KB
sha256:547776f59f3d215fe49c5996d0e1563366f3d98c4afbe482630b9201713a7959
Shuffle~python-apps~MC8CR0.dockerbuild
103 KB
sha256:8689f943ba322bcaefcf3c498b5f2cef7968eda87672b8ebf0d1c5ed16deefb5
Shuffle~python-apps~MG6RRS.dockerbuild
115 KB
sha256:4c9f2f9bf69e4771036dfa8d740c34486f638cd25d485e6e3fe64cc49a92428a
Shuffle~python-apps~OI6IQ4.dockerbuild
113 KB
sha256:7716f0b477c130db1575f8715c04c13969c9413ce9a85f5aca0b1a85a084112f
Shuffle~python-apps~QIS1WM.dockerbuild
111 KB
sha256:d781f537afa5ae64bccb2eca0fb77a5d0ce23caf73784fd76fcd0241160b1dba
Shuffle~python-apps~QLMFHR.dockerbuild
110 KB
sha256:1767bd75b775e883ef2ad14bcc9e9bc7e906359a8fdcec923d722f292bd23380
Shuffle~python-apps~QPWZVU.dockerbuild
99 KB
sha256:07ef594b4bd2247735309e7ec8f45918cd4d3b2bb66b558bd258ffa13bd6b3d0
Shuffle~python-apps~RY9YFE.dockerbuild
108 KB
sha256:04986d607150dd6fb461e6e69e0812c60446a9d34b4deb7f30c8b9ba92a2e6fc
Shuffle~python-apps~S6SSYM.dockerbuild
112 KB
sha256:083b58d19e0337cfeeb697f5c632a1f19fbb662f1ab736ed6404b6ad4f506919
Shuffle~python-apps~SAS54Z.dockerbuild
107 KB
sha256:f1eb9b1073dd18294bbd20d2c2ca21c9da8cf605fa6b0ce7a9419f8b20d0d100
Shuffle~python-apps~T8M975.dockerbuild
111 KB
sha256:ee9b603d73f8143668792c22fea082f393f8d05d24f4990b2084b015c9428290
Shuffle~python-apps~TJMFWI.dockerbuild
104 KB
sha256:fa65cab202ed9ea3d010018cf944263f3860f8793383007b94a3eba996905b12
Shuffle~python-apps~TRKY8D.dockerbuild
109 KB
sha256:e8497b062493ea7fbdff6db7ecaec1d87674a1d0630f7897e2b4814ecba37cdd
Shuffle~python-apps~U3J3HB.dockerbuild
109 KB
sha256:74b13baafe1c076bcb1f2825a94a034db9c6b5b7461b7196684094c12f22dd4f
Shuffle~python-apps~UDZII2.dockerbuild
99.5 KB
sha256:c3fab2a2285677941d9628683b28af14ab29cabad57bd0a4258bb9b4c86cef2e
Shuffle~python-apps~V5SZ8I.dockerbuild
106 KB
sha256:9995a1580c4a6c0222b92331198e996465b1ba83a96b5fd19b65bdc7197294f6
Shuffle~python-apps~VBZQKL.dockerbuild
108 KB
sha256:55078831c8727bae99375f443e7a1306457b0cc856ba7137f9956250bec40dac
Shuffle~python-apps~VW2Q3U.dockerbuild
108 KB
sha256:1fb4a9d83e3faf9fafa168c89f48394b8c5a54ae2c905a6e5ad94bd466ebdec9
Shuffle~python-apps~W757Y2.dockerbuild
119 KB
sha256:6b755429f6cce3b4d0e375d77aeca1dd1b50273684ba9668a2326b1858d13001
Shuffle~python-apps~X48CXR.dockerbuild
104 KB
sha256:41c254c9d193d192800edda04229ccb0dabe1fbf7f0cde6ee86d05bac4262b0d
Shuffle~python-apps~XFV91T.dockerbuild
110 KB
sha256:a05c2c9dc2bd354eec8d497f2d47d54429258b9d7493ea77a7cd8363579fa593
Shuffle~python-apps~Y6V4D4.dockerbuild
104 KB
sha256:ac47abd180adea92ee2db4fae6b0cee5072c81bb7c326b519f0cbb37accb5e5f
Shuffle~python-apps~Z3DISO.dockerbuild
227 KB
sha256:8d58338074ad7eb09131da03527d47c32c459257117fcdfb0f3e28c4968d4474
Shuffle~python-apps~Z4IWI2.dockerbuild
106 KB
sha256:74494d51cbef3f61489018a0374b2339c97cfb1440df09cb3d9ead009827313f
Shuffle~python-apps~ZE4SE3.dockerbuild
109 KB
sha256:c6d83af0af0c2bca643baaf3c9a1cf74289e9d7ea3cd1b7e644674cb2a21becd
Shuffle~python-apps~ZVKFCJ.dockerbuild
108 KB
sha256:e5784cbbf5ea5cf258c3c8fdf5f40640c65af802d3ff46157ac9314ba5f0c870